Catalogue
-
Flusenko 120 W soldering iron with precise digital heat setting from 200 to 600 °C
120 WDigital200-600 °C
-
Flusenko 60 W soldering iron with adjustable heat and everything needed for your first joints
8-in-1contact, conventional60 W
-
Amtech RMA-223-UV Gel Flux, 10 ml, for SMD Work and Board Repair: Flux Only, No Plunger
RMA-223-UV10 mlPaste (gel)
-
Flusenko Flux Paste with Plunger: 10 ml of RMA-223-UV Gel for Small SMD Components and Board Repair
RMA-223-UV10 mlPaste (gel)
-
DSUNYK NC-223-ASM gel flux for reballing and SMD work that stays on the pads and needs no washing
Not required (No-Clean)DSUNYK NC-223-ASMFlux gel in a syringe
-
A spool of fine Lefavor 63/37 solder: 0.8 mm wire with low-temperature flux for dense board work
Sn63/Pb37 (63% tin, 37% lead)0.8 mm2 %
-
Silver RESTEQ solder on a spool: 1 mm wire with rosin that cleans the joint as you solder
Solder wire with rosin1 mm50 g
-
JJS 60Sn/40Pb solder wire: a spool for the workshop, the radio amateur and the repair bench
1.0 mm60Sn/40Pb (60% tin, 40% lead)Low-melting tin-lead
-
Flusenko copper-coated tip cleaning wool for repair benches and hobby soldering
Copper-coated metal shavingsShavingsCopper
-
YATO brass tip cleaning ball in a metal pot with a lid for the soldering bench
YATOYT-82510Brass wool (ball)
-
Pro'sKit Solder Sucker for Hobbyists and Repair Shops: a Vacuum Pump You Can Strip Down for Cleaning
metal and plastic210 mm0.150 kg
-
A Plastic Tip to Replace a Worn One: Flusenko Nozzle for Pro'sKit Desoldering Pumps
replacement nozzle for a desoldering pumpPro'sKit (specific models not named)plastic
-
Flusenko FFQ-939 suction pickup tweezers for chips, resistors and diodes
FFQ-939Vacuumflat objects (chips, resistors, diodes)
-
S-120 silicone mat 34×23 cm with a 3 mm layer — an all-round surface for repairs and hobby projects
S-120Soldering mat34×23 cm
-
Flusenko spring-coil soldering iron stand with a tip sponge in the box
MetalMetal spring coilStable, prevents wobbling and tipping
-
Flusenko Y fork soldering iron rest in 2 mm metal for small benches
MetalY-shaped fork2 mm
-
Riesba NC-559-ASM gel flux with a fine needle for board repair and trace restoration without cleaning
Riesba NC-559-ASMGel, paste-like10 ml
-
Flux-cored Lefavor 63/37 solder in a 1 mm gauge — for boards and wires, with no cleanup afterwards
Sn63/Pb37 (63% tin, 37% lead)183 °C1 mm
-
Wick CP-2515 copper strip for desoldering chips and SMD components
Wick CP-2515Solder removal during desolderingCopper
