Skip to content

Order by 16:00 and it ships today · Nova Poshta from UAH 70 · Free over UAH 1,500

Lightweight Flusenko Desoldering Pump in a Blue Aluminium Body for Precise SMD Component Removal

ESD safe, with a replaceable nozzle

SKU А000162

In stock · Order by 16:00 and it ships today (14 h 26 min left)

34 UAH

Flusenko makes this solder sucker weighing only 0.049 kg, with a blue anodised aluminium body measuring 20×185 mm. It clears molten solder when a chip, transistor or connector has to come off a board. The heat-resistant plastic tip has a 2.5 mm opening and a 5.4 mm outer diameter. The tool is new and supplied singly.

In stock

Nova Poshta — from UAH 70, free over UAH 1 500

Ukrposhta — from UAH 45, 2–4 days

Rozetka Delivery — UAH 100 · Meest Express — carrier rate

Pay by card or cash on delivery · 14 days to return

SKU: А000162 Category: Tag: Brand:

Frequently bought together

  • Details

Total: 50 UAH

Flusenko makes this solder sucker weighing only 0.049 kg, with a blue anodised aluminium body measuring 20×185 mm. It clears molten solder when a chip, transistor or connector has to come off a board. The heat-resistant plastic tip has a 2.5 mm opening and a 5.4 mm outer diameter.

Specifications

ItemData
Weight0.049 kg
Dimensions20×185 mm
Length185 mm
Body diameter20 mm
Width20 mm
BodyAnodised aluminium, blue
TipHeat-resistant plastic
Tip outer diameter5.4 mm
Tip inner diameter2.5 mm
Pieces per pack1 pcs
ConditionNew

What you get

  • Precise work near pins — a 2.5 mm tip opening.
  • Minimal weight in the hand — 0.049 kg.
  • A heat-resistant plastic tip — made for contact with molten solder.
  • An anodised aluminium body — blue, 20 mm in diameter.
  • A new tool, supplied singly — 1 pcs per pack.

Who it suits

Anyone removing SMD components, chips, transistors and connectors: service centres, home workshops, radio hobbyists. Also schools teaching electronics and soldering basics.

Who should skip it

If you need a metal tip or a set of replaceable tips, the specifications do not cover that; the tip is plastic. No built-in heating is listed in the specifications: the tool works with solder that is already molten.

Use and compatibility

Removing molten solder; desoldering chips, transistors, connectors and other SMD components; repairing and reworking printed circuit boards; fixing faulty solder joints; teaching electronics basics. The supplier gives no list of compatible devices.

In the box

One Flusenko aluminium solder sucker (1 pcs).

Questions and answers

Is it suitable for SMD components?

Yes, removing chips, transistors, connectors and other SMD components is its main purpose; the tip opening is 2.5 mm.

How light is it?

It weighs 0.049 kg at 185 mm long.

Is the tool new?

Yes, the condition is new, 1 pcs per pack.

Can it be used in electronics classes?

Yes, the supplier lists teaching electronics basics in schools among its uses.

Additional information

Weight0,050 kg
Dimensions20,0 × 4,0 × 4,0 cm
Weight

0.049 kg

Dimensions

20×185 mm

Length

185 mm

Body diameter

20 mm

Body

anodised aluminium, blue

Tip

heat-resistant plastic

Tip outer diameter

5.4 mm

Tip inner diameter

2.5 mm

Pieces per pack

1 pcs

Condition

new

Reviews

There are no reviews yet.

Be the first to review “Lightweight Flusenko Desoldering Pump in a Blue Aluminium Body for Precise SMD Component Removal”

Your email address will not be published. Required fields are marked *

Works with

// Good to know

Helpful guides